1010 Dynamic Rotary Torque Sensor 0-5-1000N.m

Posted on by
1010 Dynamic Rotary Torque Sensor

The 1010 Dynamic Rotary Torque Sensor is made of high-quality alloy steel/stainless steel. The resistance strain is a sensitive element, and the integrated Rotary Torque Sensor is composed of an integrated circuit. Power supply and signal output are realized by brushes.

RFQ Torque Sensors

Features of 1010 Dynamic Rotary Torque Sensor

  • The resistance strain is an integrated product composed of a sensitive element and an integrated circuit, and the power supply and signal output are realized through the brush.
  • Low to medium range torque measurement. 0-5-1000N.m optional;
  • It can measure the torque value in both forward and reverse directions.
  • Both ends are connected by shaft keys, which is easy to install and use.
  • Speed up to 1800 rpm
  • Suitable for dynamic torque detection

Technical Parameters

ParametersTechnical indicators
Measuring range5,10,20,50,100,200,300,500,1000Nm
Sensitivity1.5±10% mV/V
Zero output±1% F.S.
Nonlinear±0.1, 0.3% F.S.
Hysteresis≤±0.05% F.S.
Repeatability≤±0.05% F.S
Creep≤±0.03% F.S/30min
Temperature Sensitivity Drift0.03% F.S. / 10℃
Zero temperature drift0.03% F.S. / 10℃
Input resistance350,750±10Ω
Input resistance350,700±5Ω
Response frequency100μS
Insulation resistance≥5000MΩ/100VDC
Excitation voltage10VDC (9-15VDC)
Temperature Compensation Range-10 ~ 60℃
Range of working temperature-20 ~ 65℃
Safe Overload150% F.S.
Extreme overload200% F.S.
Cable sizeØ5.2×3m
Electrical connectionsRed/E+, Black/E-, Green/S+, White/S-
MaterialAluminium, stainless or alloy steel
Other requestcustomizable

Dimensions

ModelRange NmVKABCDEFGHKΦLΦNYAxial force NRradial force N
10105,10,151/4″77285258148.585111314.83815030
101120,30,503/8″74.53858441918/6/2512.72250060
10121001/2″793858441922.5/6/2516.622700100
1013200-5003/4″975876502930/5/4030252000150
101510001″11273905736.534.5/528.5504028.54000250

Learn More About Rotary Torque Sensor

Like many other types of transducers, torque transducers use strain technology to measure. The sensor is usually a metal elastomer with a strain gauge (SG) mounted on it. The strain gauge is firmly attached to the elastomer.

If an external load acts on the sensor, the measuring body will be deformed. The resistance of the strain gauge will also change.
In this way, the magnitude of the load can be measured by the change in resistance. This applies not only to torque sensors, but also to load cells, force sensors and other types of sensors.

  1. Detection of output torque and power of rotating power equipment such as electric motors, engines, and internal combustion engines;
  2. Detection of torque and power of railway locomotives, automobiles, aircraft, ships and other machinery;
  3. Detection of torque required for compressors, water pumps, mixers, transmissions, etc.;
  4. Machine tool processing, rotational speed torque detection and torque control of drilling equipment;
  5. Can be used to make viscometers and torque wrenches;
  6. Various torque power testing equipment and laboratory use;

Torque sensors are also called torque sensors, torque sensors, torque sensors, and torque meters. They are divided into two categories: dynamic torque sensors and static and static torque sensors. Among them, dynamic torque sensors can also be called torque sensors, torque speed sensors, and non-contact torque sensors. sensor, rotational torque sensor, etc.

  1. Dynamic torque sensor/rotational torque sensor

Dynamic torque sensors/rotating torque sensors are used in applications where torque measurement must be performed on rotating shafts, engines or stationary electric machines. In this case, the transducer must rotate on a straight line connected to the shaft. Dynamic torque sensors are equipped with slip rings or wireless electronics that transmit torque signals while rotating (non-contact sensors).

  1. Static torque sensor

In some applications, a static torque sensor can be used to measure the torque measurement made by an in-line rotary sensor at the point where the torque is transmitted to the ground (static torque measurement).

For a given application, static torque sensors (aka torque sensors) are generally not as sophisticated as rotary sensors and are therefore less expensive than rotary sensors.
Static torque transducers are often used as torque calibration tools or torque wrench calibration tools.
Static torque sensors can also be used as miniature electric torque screwdrivers, allowing engineers to obtain torque feedback in real-time, or to study the torque applied during assembly.

Read more about: Static / Reaction Torque Vs. Rotary Torque

If you have any questions about the 1010 Dynamic Rotary Torque Sensor, you can always contact us
and we will be with you shortly.

Contact Support

More Featured Torque Sensors

1050A Series Dynamic Torque Transducer
1050C Dynamic Micro Torque Sensor-10 Nm
1050D Dynamic Torque Sensor for Dynamic Micro Torque Measurement-5Nm
1050E Dynamic Micro Torque Sensor 0-0.1-5N.m

Sino-Inst is a manufacturer of Dynamic Rotary Torque Sensor for Dynamic Torque Measurement 0-5-1000N.m. We offer more than 10 types of Dynamic Rotary Torque Sensors. Dynamic Rotary Torque Sensors can measure a variety of different mechanical power, rotational speed and torque measuring devices.

Dynamic Rotary Torque Sensor is also called rotary torque transducer, torque transducer. Mainly used for torque measurement in dynamic situations. The Dynamic Rotary Torque Sensor is equipped with a speed measuring device, which can measure the rotational speed while measuring the torque. At this time, the Dynamic Rotary Torque Sensor can also be called a torque speed sensor.

Sino-Inst’s Dynamic Rotary Torque Sensor, made in China, have good quality, with better prices. Our Dynamic Rotary Torque Sensors are widely used in China, India, Pakistan, USA and other countries.

Sino-Inst’s entire team is well trained, so we can ensure that each customer’s needs are met. If you need any help with your product requirements, whether it is a Dynamic Rotary Torque Sensor, level sensors, or other equipment, please give us a call.

Request a Quote

Please enable JavaScript in your browser to submit the form
1010 Dynamic Rotary Torque Sensor| 0-5-1000N.m

The 1010 Dynamic Rotary Torque Sensor is made of high-quality alloy steel/stainless steel. The resistance strain is a sensitive element, and the integrated Rotary Torque Sensor is composed of an integrated circuit. Power supply and signal output are realized by brushes.

Product SKU: 1010 Dynamic Rotary Torque Sensor

Product Brand: Sino-Inst

Product Currency: USD

Product Price: 700

Price Valid Until: 2029-09-09

Product In-Stock: InStock

This entry was posted in Torque Sensors by KimGuo11. Bookmark the permalink.

About KimGuo11

Wu Peng, born in 1980, is a highly respected and accomplished male engineer with extensive experience in the field of automation. With over 20 years of industry experience, Wu has made significant contributions to both academia and engineering projects. Throughout his career, Wu Peng has participated in numerous national and international engineering projects. Some of his most notable projects include the development of an intelligent control system for oil refineries, the design of a cutting-edge distributed control system for petrochemical plants, and the optimization of control algorithms for natural gas pipelines.