Liquid chemical level sensor is suitable for chemical storage tanks or chemical processing. Especially for highly corrosive liquids.

Features of Corrosive Liquid Chemical Level Sensor

1. The guided wave radar level meter is highly versatile. It is suitable for the measurement of acids, alkalis or other corrosive media
2. Anti-hanging material. The unique circuit design and sensor structure of the guided wave radar level meter make its measurement not affected by the hanging material of the sensor. No regular cleaning is required to avoid false measurements.
3. Maintenance-free. The guided wave radar level gauge has no moving parts during the measurement process. There is no damage to mechanical parts and no maintenance is required.
4. Anti-jamming. Contact measurement by guided wave radar level meter. Strong anti-interference ability, can overcome the influence of steam, foam and stirring on the measurement.
5. Accurate and reliable. The measurement volume of the guided wave radar level gauge is diversified, which makes the measurement more accurate. The measurement is not affected by environmental changes, with high stability and long service life.

Specifications of SIRD-702 GWR Corrosive Liquid Chemical Level Sensor

Suitable for Medium:	Liquid,  especially corrosive liquids
Application:	Acids, bases or other corrosive media
Explosion-proof Grade:	Exia IIC T6 Ga/Exd IIC T6 Gb
Measuring Range：	20m
Frequency:	500MHz-1.8GHz
Antenna:	Full PTFE sealing cable type or rod antenna
Accuracy:	±10mm
Process Temperature:	（-40～200）℃
Process pressure:	（-0.1～0.3）MPa
Signal output:	（4～20）mA/HART
The Scene Display:	Four LCD/Can be programmed
Power Source:	Two-wire (DC24V) ； Four-wire（DC24V/AC220V）
Shell:	Aluminum /Plastic
Connection:	Flange (optional) / Thread

What is the best method for sensing the level of a corrosive liquid in a tank

If the user’s tank can be perforated. Then choose guided wave radar liquid level sensor, use corrosion-resistant material. It is the most cost-effective option.

If the user’s tank cannot be perforated. Then it is the best choice to choose an externally attached ultrasonic liquid level meter. Because the sensor can be directly attached to the bottom and side of the tank. No need to cut holes, easy to install. But the cost will be a little higher.

External Tank Level Indicator refers to an externally mounted level sensor. It is used to install on the outside of the liquid storage tank to measure the liquid level of the tank. When measuring with External Tank Level Indicator, install the ultrasonic probe just below the outer wall (bottom) of the container under test. No need to cut holes, easy to install. Does not affect on-site production. It can realize accurate measurement of various toxic substances and various pure liquids in high temperature and high pressure airtight containers.

Ultrasonic Tank Level Sensors

Ultrasonic Level Sensing is a low-cost liquid level measurement technology. Ultrasonic Level Sensing sensors and transmitters are used for tank or river level measurement. Ultrasonic Level Sensing does not need to contact the medium, can be continuously measured, low cost. Therefore, Ultrasonic Level Sensing is very popular among users. Ultrasonic liquid level sensors are available in general and intrinsically safe types. Output 4~20mA standard signal or output the measurement result to the secondary meter through RS-485. Meets the system’s automatic control.

Float Switch Level Sensors for chemical processing

Float level sensors are continuous level sensors. Float level gauges use magnetic floats as measuring elements. magnetic float that rises and falls as liquid levels change. The movement of the float will generate a magnetic field. The sensor’s internal resistance changes linearly, and the intelligent converter converts the resistance change into a 4~20mA standard current signal. It can display the liquid level percentage, 4~20mA current and liquid level value on the spot. It can also output the switching value signal to conduct liquid Bit switch control.

We also supply various chemical flow meters. Can meet the flow measurement of various chemical liquids.

Anti-corrosive Submersible Level Transmitter

Sino-Inst offers over 10 GWR Corrosive Liquid Chemical Level Sensors for level measurement. About 50% of these are Guided Radar level meters, 40% is the tank level sensor.

A wide variety of GWR Corrosive Liquid Chemical Level Sensors options are available to you, such as free samples, paid samples.

Sino-Inst is a globally recognized supplier and manufacturer of Guided Wave radar level measurement instrumentation, located in China.

Request a Quote