Dew Point Transmitter, referred to as dew point analyzer, is an instrument for measuring the moisture content in gas. Dew Point Transmitter 608 Series uses polymer material resistance capacitive dew point sensor. It can measure trace moisture content in various gases. It is suitable for various online analysis occasions that require strict control of moisture content.
Features of Dew Point Transmitter 608 Series
- Original ultra-small and integrated high temperature and humidity sensor module. Simple installation, convenient for system networking and wiring;
- SHT series temperature and humidity sensors imported from Switzerland SENSIRION are adopted. The acquisition accuracy is high and the consistency is good;
- Onboard CR2450 wide-temperature button battery. External power failure still ensures the normal operation of the module, and the data will not be lost;
- Integrated large-capacity flash chip. Allows storage of up to 65,000 records. Meets long-term recording requirements;
- Ultra-low power consumption design. When powered by on-board button battery, the average power consumption is only tens of microamperes;
- Simultaneously output temperature and humidity, dew point temperature, wet bulb temperature.
- With Smart Logger host computer software, the data can be downloaded and professionally analyzed.
- Adopt standard Modbus-RTU protocol. It can easily realize the interface with PLC, DCS and various configuration software;
- Communication protection: RS485 communication signal output interface adopts double overvoltage and overcurrent protection;
- 4.5V~12V ultra-wide voltage input;
- Power polarity protection, with anti-reverse connection function.
Technical Parameters
| Item | Technical Specifications and Features |
| Powered by | DC 4.5V~12V, onboard CR2450 3V button battery |
| power consumption | <0.1W |
| Range | -30~80℃, 0~99%RH |
| The accuracy | Temperature ±0.1°C(@20-60°C) |
| Humidity ±1.5%RH(@0-80%RH,@25℃) | |
| Long-term stability | Humidity: <1%RH/Y Temperature: <0.1°C/Y |
| Dew point range | -60°C~60°C (-76 to 140°F) |
| Response time | 10S(1m/s wind speed) |
| Communication Interface | RS485/MODBUS-RTU |
| Records and Software | Support 65,000 records, equipped with Smart Logger professional data management and analysis software |
| Communication baud rate | 1200, 2400, 4800, 9600, 19200, 115200 can be set, the default is 9600pbs |
| Byte format | 8 data bits, 1 stop bit, no parity |
Dew Point Transmitter 608 Series Advantages
Dew Point Transmitter Application
- Dew point management for compressed air Drying dryers for plastic raw materials
- Installed in a freeze dryer
- Installed in the important position of the pipeline
- Plastic raw material drying dryer
- In heat treatment furnace
- Installation in electroplating furnace
- Installed in a plastic firing furnace
- Purity Control for Gas Generators
- Installed in an oxygen generator
- Installed in a nitrogen generator
FAQ
For any other questions or further information about our Dew Point Transmitter 608 Series, we are always here to assist. Reach out to us today!
More Gas Measurement Solutions
What Is a Doppler Flow Meter?
What Is Zirconia Oxygen Sensor?
Secrets of Shaft Torque Sensors: All You Need to Know
Flow Meter Selection Guide 101: Find the Perfect Fit for Your Application
Wetted Materials of Pressure Senors – Definition and Overview
Custom Case: Pressure Transducer Connector with 6 Pin Bendix Connector
As we reach the culmination of our introduction to the Dew Point Transmitter 608 Series, it’s time to summarize the exceptional features of this innovative product:
- A comprehensive measuring range of -60 to +60°C.
- A compact design encased in robust stainless steel.
- Sensors with remarkable long-term stability.
- A rapid response time, and
- An impressive accuracy of ±2°C at an ambient temperature of 25°C.
- All these features make the 608 Series a reliable solution for all your temperature and humidity data collection needs.
At Sino-Inst, we don’t just supply products; we offer solutions backed by extensive industry experience. We understand that your needs are unique, and so is our approach to fulfilling them. Our commitment to precision, reliability, and customer satisfaction drives us to offer customization services that ensure our product fits seamlessly into your operations.
Take the next step towards better control and superior accuracy. Embrace the Sino-Inst difference with the Dew Point Transmitter 608 Series today. Your journey towards precise environmental data collection and control is just a click away. Reach out to us now!
Request a Quote
Wu Peng, born in 1980, is a highly respected and accomplished male engineer with extensive experience in the field of automation. With over 20 years of industry experience, Wu has made significant contributions to both academia and engineering projects.
Throughout his career, Wu Peng has participated in numerous national and international engineering projects. Some of his most notable projects include the development of an intelligent control system for oil refineries, the design of a cutting-edge distributed control system for petrochemical plants, and the optimization of control algorithms for natural gas pipelines.
Dew Point Transmitter 608 Series | RS485 | Sino-Inst
Dew Point Transmitter, referred to as dew point analyzer, is an instrument for measuring the moisture content in gas. Dew Point Transmitter 608 Series uses polymer material resistance capacitive dew point sensor. It can measure trace moisture content in various gases. It is suitable for various online analysis occasions that require strict control of moisture content.
Product SKU: Dew Point Transmitter 608 Series
Product Brand: Sino-Inst
Product Currency: USD
Product Price: 699
Price Valid Until: 2029-09-09
Product In-Stock: PreOrder
5