High pressure rotameter is suitable for flow measurement of high pressure liquid and gas.
Standard type rotameter: DN15-DN50, can withstand 4.0MPa. High pressure rotameter: DN15-DN50, can withstand 25MPa. The pressure level of the jacket is 1.6MPa, and the special type should be negotiated with our engineers before selecting and ordering.
High temperature metal tube rotameter can be applied to temperature range: 100℃~450℃
The high-pressure rotameter adopts an advanced magnetic sensor that detects the change of the magnetic field angle without contact. And with a microprocessor system. It can realize liquid crystal indication, accumulation, and remote transmission (4-20Ma). Pulse output, upper and lower limit alarm output and other functions. This type of intelligent signal transmitter has high precision and reliability.
The working principle of High Pressure Rotameter:
The high-pressure metal tube rotameter is the force that the upper and lower ends of the float generate differential pressure to form a rising force when the measured medium passes through the conical measuring tube from bottom to top.
When the lifting force on the float is greater than the weight of the float immersed in the fluid, the float will rise. The area of the annulus will increase accordingly. The fluid velocity at the annulus will drop immediately. The differential pressure at the upper and lower ends of the float will decrease. The float is stabilized at a certain height until the lift force is equal to the weight of the float immersed in the fluid.
The height of the float position corresponds to the flow rate of the measured medium.
The float has a built-in magnet. When the float moves up and down with the medium, the magnetic field changes with the movement of the float.
a. For the local type, the rotating magnet in the local indicator is coupled with the magnetic steel in the float to rotate. At the same time, the pointer is driven to indicate the flow rate at this time through the dial.
b. For the intelligent type, the change of the magnetic field is converted into an electrical signal by a solid-state magnetic sensor in the intelligent indicator. After A/D conversion, microprocessor. D/A output, LCD liquid crystal display, to display the flow rate size and cumulative flow.
Extended reading: High Pressure Flow Meters for Liquids-Steam-Gas
High Pressure Rotameter Features:
- All-metal structure design. Sturdy, simple, high pressure resistance, high temperature resistance, anti-corrosion, long service life;
- Short stroke, total height 250mm, easy installation;
- The mechanical pointer indicates the instantaneous flow on the spot. LCD liquid crystal displays the instantaneous flow and cumulative flow;
- Intelligent indicator. Using signal acquisition and processing chip, modular design, no magnetic lag;
- With data recovery, data backup, power failure protection and error self-diagnosis functions;
- HART type indicator, two-wire 24VDC power supply. 4-20mA standard current signal output superimposed with HART protocol;
- Parameter configuration and on-site adjustment can be performed through the HART communication hand-held communicator;
- Connect with the PC serial port. Through the Windows program, the instrument can be calibrated on site;
- Can be used in flammable and explosive hazardous situations;
- Various installation forms such as vertical, horizontal, top in and bottom out, bottom in and side out, side in and side out. Flange or threaded connection.
High Pressure Rotameter Applications:
The metal tube rotameter has a simple structure, reliable operation, high accuracy and wide application range. Can withstand higher pressures than glass rotameters.
LZ series flowmeters have local indication, electric remote transmission, limit switch alarm, corrosion resistance, jacket type, damping type and explosion-proof varieties.
It is widely used in the measurement and automatic control of liquid and gas flow in national defense, chemical industry, petroleum, metallurgy, electric power, environmental protection, medicine and light industry and other departments.
Read more about: Benefits Of Digital Gas Mass Flow Meters
What Is Difference Between Rotameter and Flow Meter?
A rotameter is a device that measures the flow rate of liquid or gas in a closed system. It consists of a float that moves up and down in a tube, based on the fluid’s flow rate. The faster the fluid flows, the higher the float rises.
A flowmeter is a device that measures the volume of liquid or gas that flows through it. There are many different types of flowmeters, each designed to measure different types of fluids. For example, positive displacement flowmeters measure the volume of fluid that passes through them, while rotameters measure the rate of flow.
Read more about:
- What is the difference between an orifice flowmeter and a rotameter?
- What is the difference between a rotameter and a turbine flowmeter?
- What is the difference between a mass flowmeter and a rotameter?
More Featured High Pressure Flow Meters for Liquids-Steam-Gas
Are high pressure flow meters the same as regular flow meters? Can high pressure flow meters be replaced by ordinary flow meters?
Of course not.
You need to measure the flow of fluids under high pressure, but you’re not sure which type of flow meter is best for your application.
Choosing the right flow meter can be difficult, because there are so many different types available on the market. How do you know which one is right for your specific application?
Sino-Inst offers a wide range of high pressure flow meters that are specifically designed to operate in demanding applications. Our high pressure flowmeters are made from stainless steel construction and are ideal when measuring the flow of fluids under high pressures.
Read more about: High Pressure Flow Meters Types
Frequently
Asked
Questions
More Featured Flow Measurement Solutions
High Pressure Rotameter for Liquids/gas-Upto 25 Mpa is mainly used for small and medium diameter flow measurement. It can measure liquid, gas, steam, etc. Complete product series specifications, in all walks of life are widely used.
Extended Reading: What is difference between rotameter and flow meter
High Pressure Rotameter for Liquids/gas-Upto 25 Mpa can be stable flow measurement without modifying the pipeline. This greatly meets the measurement needs of many applications. From small tubes to large tubes can be used.
Sino-Inst’s High Pressure Rotameter for Liquids/gas-Upto 25 Mpa, made in China, have good quality, with better prices. Our flow measuring instruments are widely used in China, India, Pakistan, USA and other countries.
Sino-Inst’s entire team is well trained, so we can ensure that each customer’s needs are met. If you need any help with your product requirements, whether it is a metal tube flow meters, level sensors, or other equipment, please give us a call.
Request a Quote
Wu Peng, born in 1980, is a highly respected and accomplished male engineer with extensive experience in the field of automation. With over 20 years of industry experience, Wu has made significant contributions to both academia and engineering projects.
Throughout his career, Wu Peng has participated in numerous national and international engineering projects. Some of his most notable projects include the development of an intelligent control system for oil refineries, the design of a cutting-edge distributed control system for petrochemical plants, and the optimization of control algorithms for natural gas pipelines.