The high temperature flow meter is a welded orifice flow meter. Suitable for high temperature and high pressure steam flow and high pressure flow water measurement.
The nozzle of the temperature and high pressure welding orifice plate adopts the standards of the Ministry of Water Resources and Electric Power. The standard is (DG0700-DG0750). Welded integrated orifice plates for high temperature and high pressure are mainly used for measuring orifice plates for high temperature and high pressure steam flow and high pressure flowing water in power plants.
Sino-Inst, Manufacturer for differential pressure flow meters. Including the Orifice plate, Venturi, Annubar, etc. Suitable for liquid, gas, and steam flow measurement. Please contact our sales engineers for technical support!
Features of High pressure and High temperature flow meter
- The experimental research and data accumulation are abundant, supported by national standards.
- Wide range of differential pressure used.
- The pipe diameter has a wide range of use.
- The measurement accuracy is high and the range is wide.
- It can be applied to various working conditions such as high temperature, high pressure and ultra-low temperature.
- Can be applied to various materials.
- Digital display on site, compatible with remote signal transmission.
- It is suitable for a wide range of media, and can measure the flow of various liquids, gases and steam.
- Simple manufacturing and convenient installation.
- The pressure loss of the welded orifice plate is about half of the differential pressure.
Welding Orifice Plate|High pressure and High temperature flow meter Specification
Nominal diameter: 25mm≤DN≤2400mm
Nominal pressure: PN≤42Mpa
Working temperature: -50℃≤t≤550℃
Aperture ratio: 0.10≤β≤0.75
Reynolds number range: when 0.10≤β≤0.56, 5000≤ReD
When 0.45≤β≤0.75, 10000≤ReD
Accuracy: Class 1.0, Class 1.5, Class 2.0
Extended reading: Vortex Hygienic Flow Meter
More Featured High Temperature Flow Meters
Here we simply list the temperature of the following different types of high temperature flow meters:
- Thermal mass flow meter ：max 300℃ (572℉)
- Coriolis mass flow meter: max 350℃ (662 ℉)
- Vortex flow meter: max 350°C (662 ℉)
- Balanced flow meter: max 800℃（1472 ℉）
- Magnetic flow meter :max 160℃ (320 ℉)
- Liquid Turbine flow meter: max 150℃ (302 ℉)
- Oval gear flow meter:max 200℃ (392 ℉)
- Variable Area Flow Meter/Metal Tube Rotameter: max 300℃ (572℉)
- Gas turbine flow meter: max 80℃（176℉）
Please note: high temperature flow sensor is customized ,not standard type. If you need to measure high temperature, please contact Sino-Inst sales engineer.
Extended reading: High Pressure Flow Meters for Liquids-Steam-Gas
Vortex Split High Temperature Flow Meter
The High Temperature Flow Meter uses a split signal converter. The way the vortex body is separated from the vortex converter. The Vortex Split High Temperature Flow Meter is suitable for high temperature, high pressure, safety and explosion-proof applications, where you need to watch the meter data on site. It is widely used in the measurement of steam, gas and liquid. And inconvenience Under complex conditions of reading data.
High temperature mass flow meter
The thermal gas mass flow meter is designed based on the principle of thermal diffusion, which uses the constant temperature difference method to accurately measure the gas. The sensor part consists of two reference grade platinum resistance temperature sensors. Thermal gases are widely used in factory compressed air, blast furnace gas measurement in ironworks, and monitoring and measurement of chimney flue exhaust.
Guess you like: Gas Mass Flow Meter
High temperature ultrasonic flow meter
The clamp-on ultrasonic flowmeter composed of wall-mounted host and clamp-on flow sensor can be widely used in various water treatment industries. Applied to online measurement of various liquid volume flow. The main unit and the sensor are installed separately: the sensor is installed on the pipeline, the wall-mounted main unit is installed indoors or in the instrument box, and the main unit and the sensor are connected with an ultrasonic special cable. It is currently the most widely used ultrasonic flowmeter.
High temperature water flow meter
Magnetic Water Flow Meter provide highly accurate flow measurement for a wide variety of conductive fluid applications. Magnetic Water Flow Meter is a volumetric flow meter that measures liquids or liquid slurries that have a minimum conductivity of 5 µS/cm. Based on Faraday’s law of electromagnetic induction. Magnetic Water Flow Meter is ideal for wastewater applications or any dirty liquid which is conductive or water based. It is widely used in water treatment, environmental protection sewage measurement and control, papermaking and other industrial and agricultural production processes for flow measurement and control.
High temperature turbine flow meter
Liquid turbine flow meter is the main type of impeller type flow (velocity) meter. It is composed of sensors and conversion display. The sensor uses a multi-blade rotor to sense the average flow rate of the fluid, thereby deriving the flow or total amount. Liquid turbine flow meter is suitable for measuring liquids that are not corrosive to stainless steel 1Cr18Ni9Ti, 2Cr13 and corundum Al2O3 in closed pipelines and are free of impurities. For milk, soybean oil, edible oil, diesel, purified water.
High temperature air flow meter
You may have questions, what flowmeter can measure the air flow at ultra-high temperature?
For example, 800°C air.
Perhaps, you should use a V-cone flowmeter.
It is suitable for the measurement of various liquids, gases and steam under all working conditions and temperatures below 1330 degrees.
V-cone flow meter is also known as cone-type flow meter; inner cone flow meter; integrated V-cone flow meter. The principle of V-cone flow meter is the same as other DP flow meters, and it is also a throttling DP flowmeter.
Extended reading: V-Cone Flow Meter Applications
The basic principle of the V-cone flow meter is the same as that of other types of differential pressure flowmeters. They are based on the principle of energy conservation in the sealed pipeline. The V-cone flow meter is a cone-shaped shutoff piece suspended in the center of the pipeline, and the cone-shaped piece hinders the flow of the medium. Reshape the flow rate curve. Measuring media include water, steam, air, natural gas, nitrogen, coke oven gas, etc. The maximum working temperature is 450℃, and the maximum pressure is 40Mpa.
Read more about: Steam pressure transmitter-Pressure measure on steam pipeline
Sino-Inst offers High pressure and High temperature flow meters.
A wide variety of High pressure and High temperature flow meter options are available to you, such as brass, carbon steel. You can also choose from free samples.
Sino-Inst is High pressure and High temperature flow meter supplier. High pressure and High temperature flow meter products are most popular in Domestic Market, Southeast Asia, and Mid East.
You can ensure product safety by selecting from certified suppliers, including 375 with ISO9001, ISO14001, and Other certification.
Wu Peng, born in 1980, is a highly respected and accomplished male engineer with extensive experience in the field of automation. With over 20 years of industry experience, Wu has made significant contributions to both academia and engineering projects.
Throughout his career, Wu Peng has participated in numerous national and international engineering projects. Some of his most notable projects include the development of an intelligent control system for oil refineries, the design of a cutting-edge distributed control system for petrochemical plants, and the optimization of control algorithms for natural gas pipelines.