Our new Insertion Type Ultrasonic Flow Meter supports mono, binaural, and even quadraphonic measurements. Meet the pipeline measurement of DN80~DN6000. Compared with the single-channel ultrasonic flowmeter, the two-channel insertion ultrasonic flowmeter is more accurate, has high precision, strong stability, and is easy to install.
Technical advantages of Insertion Type Ultrasonic Flow Meter-Heat Meter
- Single/dual/four-channel host can be selected to achieve multi-channel measurement, and fluid layer measurement is more accurate;
- Standard output 4-20mA, RS485 signal;
- 220V and 24V power supply options;
- PT100, PT1000 can be connected externally; heat measurement can be realized;
- External pressure sensor can be connected to display pressure parameters;
- Using a high-speed ARM processor, the response speed reaches 0.1 seconds;
- Advanced digital signal processing technology, the measurement is not interfered by impurities such as iron filings and welding slag;
- Different sensors can be connected to solve the problem of multi-bubble application in the field;
- It is generally used to measure pure single liquids such as tap water, air-conditioning water, and heating water. However, it should be noted that the pipe must be hard and straight, such as PVC, iron pipe, stainless steel, etc.;
- The protection level of the host is IP67, and the protection level of the sensor reaches IP68;
- The host and the sensor are installed separately, the host can be installed in the indoor instrument cabinet, and the instrument panel sensor is installed on the measuring pipeline;
Technical parameters: Insertion Type Ultrasonic Flow Meter-Heat Meter
| Parameters | |
| Applications | |
| Measurable liquid | Most single-phase liquids. Less than 5% particles or bubbles. |
| Pipe material | Stainless steel, carbon steel, PVC, PPR, cement |
| Ambient temperature | -40℃～ +60℃ |
| Measured fluid temperature | -20℃～ +150℃ |
| Explosion-Proof | Flameproof ExidII BT4 |
| Intrinsically safe ExiaII BT4 | |
| Parameters | |
| Velocity range | Nominal precision flow velocity range 0.1～7.0m/s |
| Measurement accuracy | ±1.0% |
| Sensitivity | 0.01m/s. |
| Measurement repeatability | ±0.2% |
| Host | |
| Protection | IP65 |
| Power supply | External power supply: AC220V/DC18~27V; low power consumption: DC9~36V/built-in backup battery |
| Electrical Interface | External power supply: waterproof head 7×M20×1.5; low power consumption: waterproof head 4×M20×1.5 |
| LCD display | 128*64 dot matrix LCD screen |
| Keyboard input | 4 keys |
| Input and output signals | |
| Communication | RS485, MODBUS RTU protocol. |
| Flow output | Self-powered 4-20mA output/OCT |
How it works: Insertion Type Ultrasonic Flow Meter-Heat Meter
Introducing our new Insertion Type Ultrasonic Flow Meter-Heat Meter—Mono/Multi-Channel. This advanced device measures both flow and heat. Each channel is accurate, and for multi-channel products, channels support each other, improving accuracy and stability.
The measurement is based on the signal correlation method. Multi-channel products can use multiple channels at once, which greatly reduces the impact of turbulence. This makes the device more adaptable and accurate for different situations, ensuring reliable small flow and heat measurements.
Our product has a fast ARM core processor, with a response time under 0.1 seconds, making it over 10 times faster than regular flow meters. It’s great for measuring high-viscosity oils, chemical products, and ultrapure water flow. Additionally, it can connect to two temperature sensors, so it can be used as a flow or heat meter.
More Insertion Type Flow Meters
FAQ
More Flow Measurement Solutions
Condensate Flow Meter-Steam Condensate Flow Meter|Types & Selection Guide
Air Flow Measurement Instruments for Industrial Harsh Conditions
Flow Measurement Units-What Is GPM in Flow Meter?
Top Flow Meters for PVC Pipes: Find Your Ideal Match
Shop Pipe Flow Meters for Liquid and Gas 101
The Pros and Cons of Micro Motion Flow Transmitters
Our new product, Insertion Type Ultrasonic Flow Meter-Heat Meter–Mono/multi-Channel, brings new opportunities for measuring large diameter pipes.
Multi-channel Insertion Type Ultrasonic Flow Meter can use multiple channels to work simultaneously. The impact of turbulence randomness on measurement is largely overcome. It greatly improves the adaptability and measurement accuracy of different working conditions, making the measurement of small flow (heat) more guaranteed.
Sino-Inst is a professional Insertion Type Ultrasonic Flow Meters manufacturer. Experience. If you need to measure pipeline flowmeter, please feel free to contact our sales engineers!
Request a Quote
Wu Peng, born in 1980, is a highly respected and accomplished male engineer with extensive experience in the field of automation. With over 20 years of industry experience, Wu has made significant contributions to both academia and engineering projects.
Throughout his career, Wu Peng has participated in numerous national and international engineering projects. Some of his most notable projects include the development of an intelligent control system for oil refineries, the design of a cutting-edge distributed control system for petrochemical plants, and the optimization of control algorithms for natural gas pipelines.
2023 New Products! Insertion Type Ultrasonic Flow Meter-Heat Meter--Mono/multi-Channel
Our new Insertion Type Ultrasonic Flow Meter supports mono, binaural, and even quadraphonic measurements. Meet the pipeline measurement of DN80~DN6000. Compared with the single-channel ultrasonic flowmeter, the two-channel insertion ultrasonic flowmeter is more accurate, has high precision, strong stability, and is easy to install.
Product SKU: Insertion Type Ultrasonic Flow Meter-Heat Meter–Mono/multi-Channel
Product Brand: Sino-Inst
Product Currency: USD
Product Price: 1150
Price Valid Until: 2029-09-09
Product In-Stock: PreOrder
5