Density meter for liquids is a high-precision density meter based on the principle of vibration. Adopt split design. Submersible density meters can be widely used in closed or open tanks, tanks, diversion channels and open channels. Split Type Density Meter for Liquids is also widely used in the detection of sediment content in hydrological stations. Generate corresponding 4-20mA analog signal according to the change of medium density. At the same time, the digital signal can be converted and output to facilitate remote calibration and monitoring. Depending on the industrial process, density can be expressed in: Brix degrees, GL degrees, Baume degrees, Plato degrees and percent concentration.

RFQ
Split Type Density Meter for Liquids

Features of Split Type Density Meter for Liquids

  1. Input design, easy to use
  2. Continuous online monitoring
  3. Temperature compensation
  4. Integrated design, maintenance-free
  5. IP68 waterproof design, suitable for deep water measurement
  6. Explosion-proof design, convenient for use in special industries
  • Split Type Density Meter for Liquids 3
  • Split Type Density Meter for Liquids 2
  • Split Type Density Meter for Liquids 4

Technical Parameters

Measuring range:0 – 3 g/cc (0 – 3000 kg/m3)
Calibration range: 0.6 – 1.25 g/cc (600 – 1250 kg/m3)
Measurement accuracy: ± 0.001 g/cc (± 1 kg/m3)
Repeatability: ± 0.0001 g/cc (± 0.1 kg/m3)
Operating temperature range: -50℃ ~ +200℃
Maximum working pressure:20Mpa
Fluid Viscosity Range: 0 – 20000 cP
Temperature coefficient: 0.1 kg/m3/℃ (after correction)
Pressure Effect: Negligible
Built-in temperature sensor: PT100
Wetted material: Stainless steel, Hastelloy C22, manganese alloy 400, titanium alloy, etc.
Fork Coating: Standard, PTFE or Electropolished
Power supply: 20 – 28 VDC, 35 – 45 mA
Analog output: 4 – 20 mA, isolated, not self-powered
Output accuracy (20°C): ± 0.1% of reading or ± 0.05% FS
Output repeatability (-40 ~ +85°C): ± 0.05% FS
Protection class: IP65
Shell: Aluminum alloy

Technical advantages:

  • Direct density or concentration readings, available engineering units include: g/cm3, kg/m3, specific gravity, °Brix, °Baume, °Plato, °GL, percent solids, etc.;
  • Suitable for flowing or static liquids;
  • Suitable for pipeline and tank density measurement;
  • Integrated structure, no moving parts;
  • Standard industrial and hygienic process connections;
  • The instrument has a built-in temperature sensor to provide accurate temperature compensation;
  • Online remote calibration, digital local display;
  • Factory multi-point linear correction, higher precision;
  • On-site recalibration: no standard reference source, no experimental calibration, no process interruption;
  • The converter is compatible with three installation methods: wall-mounted, embedded, and desktop;

Split Type Density Meter for Liquids Applications

Split type density meter for liquids can be widely used in closed or open tanks, tanks, diversion channels and open channels.

Density meter for liquids is also widely used in the detection of sediment content in hydrological stations. In the petrochemical industry, brewing industry, food industry, pharmaceutical industry and mineral processing (such as clay, carbonate, silicate, etc.), it is specifically used for interface detection in multi-product pipelines in the above industries, density detection of stirred mixtures . Reactor endpoint monitoring, separator interface detection.

Application industry

  • Measurement of Lime Slurry Density and Concentration in Desulfurization Industry
  • Density and concentration measurement of ammonia water in the denitrification industry
  • Density and concentration measurement of pulp in mineral processing industry
  • Density and concentration measurement of proportioning liquids in the surface treatment industry
  • Density and concentration measurement of slime during coal conveying
  • Density and concentration measurement of syrups
  • Density and concentration measurement of starch emulsions
  • Density and concentration measurement of medicinal liquids and concentrates in the pharmaceutical industry
  • Density and concentration measurement of chemical reagents such as alcohol and chemical liquids
  • Density and concentration measurement of petroleum and oil-synthetic products

FAQ

A density meter is a tool that measures how much mass of a substance is contained in a certain volume of liquid. In simpler terms, it tells us how “thick” or “thin” a liquid is.

To measure liquid density, you fill a container or sample holder with the liquid. Then, the density meter checks how much the liquid weighs compared to its volume. The result tells you the liquid’s density.

A hydrometer can measure the density of liquids lighter than water. It’s a floating instrument. If the liquid is lighter than water, the hydrometer sinks more. If it’s heavier, it floats higher.

A densimeter, another name for a density meter, is used to find out the density of liquids. People use it in labs, factories, and other places to check the quality of liquids or to learn more about their properties.

More Density meter and measurement analysis solution

Tuning Fork Density Meter
Tuning Fork Density Meter
Online Density Meter – Differential Pressure Type
Integrated Zirconia Oxygen Analyzer
Integrated Zirconia Oxygen Analyzer
Dew Point Transmitter 608 Series
Dew Point Transmitter 608 Series

The Split Type Density Meter for Liquids can measure the density or concentration of any liquid and also output density, concentration, Baume and temperature simultaneously.

Density Meter for Liquids is an instrument for measuring fluid density using the principle of vibration. It is used to measure fluid density in real time. Fluid density directly depends on the vibration frequency of the fork. At the same time, a temperature sensor provides temperature compensation, and performs pressure compensation and viscosity compensation for the pressure value before leaving the factory.

Split Type Density Meter for Liquids is widely used in reaction kettle, liquid separation, desulfurization and denitrification, ammonia gas recovery, ammonia production, mixing and stirring, petroleum and petrochemical, brewing equipment, food processing, extraction and concentration of traditional Chinese medicine, acid preparation, etc.

We, Sino-Inst, manufacture and supply Split Type Density Meter for Liquids. Our Split Type Density Meter for Liquids is widely exported to various countries. Including the United States, Britain, Australia and other countries. If you need Density Meter for Liquids, please contact our sales engineers!

Request a Quote

Split Type Density Meter for Liquids | Sino-Inst

Density meter for liquids is a high-precision density meter based on the principle of vibration. Adopt split design. Submersible density meters can be widely used in closed or open tanks, tanks, diversion channels and open channels. Split Type Density Meter for Liquids is also widely used in the detection of sediment content in hydrological stations. Generate corresponding 4-20mA analog signal according to the change of medium density. At the same time, the digital signal can be converted and output to facilitate remote calibration and monitoring. Depending on the industrial process, density can be expressed in: Brix degrees, GL degrees, Baume degrees, Plato degrees and percent concentration.

Product SKU: Split Type Density Meter for Liquids

Product Brand: Sino-Inst

Product Currency: USD

Product Price: 3850.00

Price Valid Until: 2029-09-09

Product In-Stock: InStock

Editor's Rating:
5