Category Archives: Torque Sensors

1050D Dynamic Torque Sensor for Dynamic Micro Torque Measurement-5Nm

Posted on by
1050D Dynamic Torque Sensor for Dynamic Micro Torque Measurement

1050D Dynamic Torque Sensor for Dynamic Micro Torque is an integrated product composed of resistance strain sensitive components and integrated circuits. It is made of alloy steel/stainless steel material. The structural design has a small size range and high precision. The output terminal of positive and negative torque signals is the key link. The instantaneous speed can reach 4000 rpm. It is widely used in all kinds of small-scale torque measurement such as micro-motors, viscometer rotating power equipment systems, etc.

RFQ Torque Sensors

Features of 1050D Dynamic Torque Sensor

  • Based on the principle of resistance strain type, power supply and signal output are realized through brushes.
  • Various small-scale torque measurements. It can measure the torque value in both forward and reverse directions.
  • Both ends are connected by shaft keys, which is easy to install and use.
  • The maximum speed does not exceed 4000 rpm.

Technical Parameters

ParametersSpecifications
Range0-10,20,30,50,100,200,500,1000Nm
Sensitivity1.5±10% mV / V
Zero output±2% F.S.
Nonlinear±0.1，0.3% F.S.
hysteresis≤±0.05% F.S.
Repeatability≤±0.05% F.S
Creep≤±0.03% F.S/30min
Temperature Sensitivity Drift0.03% F.S. / 10℃
Zero temperature drift0.03% F.S. / 10℃
Input resistance750±10Ω
Input resistance700±5Ω
Insulation resistance≥5000MΩ/ 100VDC
Excitation voltage10-15VDC
Temperature Compensation Range-10 ~ 60ºC
Range of working temperature-20 ~ 80ºC
Safe overload150% F.S.
Extreme overload200% F.S.
Cable sizeØ5.2×3m
Electrical connectionsRed/E+, Black/E-, Green/S+, White/S-
MaterialStainless or Alloy Steel

Dimensions

Frequently asked questions

Dynamic torque: It is the torque displayed in real time during the assembly process, when the fastener is fastened. That is, the dynamic torque that the power tool applies to the bolt, overcoming the friction. The axial preload force for the bolts generated by the dynamic torque meets the engineering requirements for the preload force. Generally, the torque value preset by the tool or equipment is the dynamic torque value.

Read more about: Static / Reaction Torque Vs. Rotary Torque

The dynamic torque sensor provided by Sino-Inst is a resistance strain dynamic torque sensor. dynamic torque sensor Torque measurement using strain gauge technology.

A strain bridge is formed on the elastic axis. The electrical signal of the elastic shaft being twisted can be measured by supplying power to the strain bridge. After the strain signal is amplified, it undergoes pressure/frequency conversion. becomes a frequency signal proportional to the torsional strain.

What is the purpose of the force torque sensor?

The force torque sensor is divided into two categories: dynamic and dynamic. Force torque sensor is the detection of torque torque perception on various rotating or non-rotating mechanical parts. And convert the physical changes of torque into precise electrical signals.

The force torque sensor can be used in the manufacture of viscometers, electric (pneumatic, hydraulic) torque wrenches. It has the advantages of high precision, fast frequency response, good reliability and long life.

Field of application of force torque sensor:

  1. AC (DC) motor, servo motor, stepper motor;
  2. Control and inspection of the machining process of automobile engines, diesel engines, steering gears, the overall rigidity and torsion of the body and other components;
  3. Electric (manual) actuator, automatic opening and closing control of various valves.
  4. Control and monitoring of oil extraction and refining process, monitoring of thermal (water) power generation equipment, ore screening control, and monitoring of wind power generation equipment.
  5. Torque life test of various materials.
  6. Process control of railway machinery and equipment, etc. details as follows:
    1. Detect the output torque and power of rotating power equipment such as generators, motors, and internal combustion engines.
    2. Detect the load torque and input power of reducers, fans, pumps, mixers, winches, propellers, drilling machinery and other equipment.
    3. Detect the torque in the working process of various machining centers and automatic machine tools.
    4. The torque transmitted by various rotating power equipment systems is extremely efficient.
    5. It can detect the rotational speed and axial force while detecting the torque.
    6. It can be used to manufacture viscometers, electric (pneumatic, hydraulic) torque wrenches.

Torque sensors are not common in our daily life, but their application is very important.
The torque sensor on the car checks the torsional deformation of the torsion bar and converts it into an electrical signal. This electrical signal is transmitted to the electric power steering system under the battery.

The sensor consists of phase splitter units 1 and 2 and a torsion bar. Sensor 1 is located on the steering spindle and sensor 2 is located on the pinion shaft. After the torsion bar is rotated, the two phase splitter units create a relative angle.

The converted voltage signal is transmitted to the electric power steering system. The electric power steering system determines the corresponding working voltage of the EPS steering motor according to the relative resistance. The location of the two cells is also used above.

  1. The electric power steering system only starts the motor to generate electricity when steering is required. This can reduce the fuel consumption of the engine.
  2. It can provide power under various driving conditions. Reduce motor unevenness. The output torque of the motor is assisted by the action of the transmission. Assist system interference, improve the vehicle’s steering characteristics, and improve the vehicle’s active safety.
  3. Without hydraulic circuit, it is easier to adjust and detect. Assembly automation is higher. Different models can be quickly matched by setting different programs. Shorten production and development cycles. No oil leakage problem, reduce environmental pollution.

Electric power steering systems primarily use torque sensors to detect the magnitude and direction of torque or the angle produced by the steering wheel when the driver steers. And convert the required information into digital signal input control unit. Then there is the axis control unit pair.

These signals are calculated to obtain a torque compatible with the driving conditions. And this command is used to drive the motor to work. The output torque of the electric motor is assisted by the action of the transmission.

It’s not hard to see that torque sensors are very important. Damage to the car’s torque sensor directly causes the car to lose its steering assist function during driving. Stiff steering failure.

Such torque sensors are very important in automotive safety issues. The quality of the torque sensor directly determines the safety factor of the car.

If you cannot find an answer to your question in our FAQ, you can always contact us
and we will be with you shortly.

Contact Support

More Featured Torque Sensors

1050A Series Dynamic Torque Transducer
1050C Dynamic Micro Torque Sensor-10 Nm

Sino-Inst is a manufacturer of 1050D Dynamic Torque Sensor for Dynamic Micro Torque Measurement-5Nm. We offer more than 10 types of Dynamic Torque Sensors. Dynamic Torque Sensors can measure a variety of different mechanical power, rotational speed and torque measuring devices.

Dynamic Torque Sensors are widely used in the following areas:
Application in process industry and process industry;
In sewage treatment systems, measure the relevant power and torque;
Measure the power and torque of machinery such as aircraft, ships, railway locomotives and mines;
Can be used to make viscometers;
Measuring the output power and torque of related devices such as internal combustion engines and rotational forces;
Measure power and torque of torque wrenches, water pumps, etc.

Dynamic Torque Sensor is also called rotary torque transducer, torque transducer. Mainly used for torque measurement in dynamic situations. The dynamic torque sensor is equipped with a speed measuring device, which can measure the rotational speed while measuring the torque. At this time, the torque sensor can also be called a torque speed sensor.

Sino-Inst’s Dynamic Torque Sensor, made in China, have good quality, with better prices. Our Dynamic Torque Sensors are widely used in China, India, Pakistan, USA and other countries.

Sino-Inst’s entire team is well trained, so we can ensure that each customer’s needs are met. If you need any help with your product requirements, whether it is a Dynamic Torque Sensor, level sensors, or other equipment, please give us a call .

Request a Quote

Please enable JavaScript in your browser to submit the form

1050C Dynamic Micro Torque Sensor-10 Nm

Posted on by

The 1050C Dynamic Micro Torque Sensor is suitable for low to mid-range torque measurements. Measurable measuring 0.1/0.2/0.5/1/2/3/5/10 Nm. The maximum speed does not exceed 4000 rpm.

RFQ Torque Sensors

Features of 1050C Dynamic Micro Torque Sensor

  • Based on the principle of resistance strain type, power supply and signal output are realized through brushes.
  • Low to medium range torque measurement. It can measure the torque value in both forward and reverse directions.
  • Both ends are connected by shaft keys, which is easy to install and use.
  • The maximum speed does not exceed 4000 rpm.

Technical Parameters

Measuring range1050C   0～0.1/0.2/0.5/1/2/3/5/10 Nm 　　Nm
Output Sensitivity1.0～2.0mV/V
Straightness L±0.1; ±0.3; ±0.5%F.S
hysteresis H±0.1; ±0.3; ±0.5%F.S
Repeatability R±0.1; ±0.3; ±0.5%F.S
Operating temperature-10～+60℃
Temperature compensation rangeroom temperature～+60℃
Zero temperature effect±0.1%F.S/10 ℃
Excitation voltage12VDC
Insulation resistance2000MΩ/100VDC
Input resistance700±10/350±10Ω
Output resistance700±5/350±5Ω
Zero output0～±1%F.S
Safe overload rate120%F.S
Factory standard wire length3m

Dimensions

Electrical Connection

Connection methodPlug socket numberwire color
Input (power) positive terminal1red
Positive end of output signal2yellow
Negative terminal of output signal3White
Input (power) negative terminal4green
If the plug socket size and wire color change color, please refer to the sensor verification certificate.

Frequently asked questions

Dynamic torque sensor can be divided into contact measurement and non-contact measurement according to the signal transmission mode, both of which should overcome the problem of rotating strands.

In the dynamic measurement process, the measuring element needs to lead the signal line from the rotating shaft to the control circuit of the fixed housing for signal processing.

If it is led out by the collector ring and the carbon brush (similar to the motor brush), it is a contact type;
If the principle of electric, magnetic and optical sensing is adopted, the signal signal is directly transmitted instead of the collector ring and the carbon brush, that is, non-contact measurement.

According to material mechanics, when a torque is applied to a shaft, it will cause a torque deformation. It consists of two physical quantities, one is the torsion angle and the other is the maximum shear stress or strain.

As long as one of them is measured, the torque of the shafting can be obtained according to the relevant calculation formula. Therefore, according to this measurement principle, it can be divided into torsion angle measurement and strain measurement.

Principle of strain measurement.

The most traditional method of strain measurement is to paste resistance strain gauges. With the development of science and technology, in addition to resistance strain gauges, there are many new methods. Such as acoustic surface wave strain measurement, piezoelectric strain measurement and strain measurement by the stretching effect. But the essence of its measurement is to obtain the strain value.

Traditional resistance strain gage torque transducers have strain gages as bridges, glued at 45° and 135° on the elastic axis. When the elastic shaft is torqued, the torsional deformation will lead to the change of bridge resistance, and the change of the strain bridge resistance will be converted into the change of the voltage signal. The signals transmitted from the rotating shaft to the fixed housing mainly include carbon brush contact, electromagnetic induction and wireless transmission.

Read more about: Static / Reaction Torque Vs. Rotary Torque

When the existing torque sensor is used, it is mostly used as a precision torque measurement. After a long time of use, it will cause mechanical fatigue. Therefore, it must be calibrated and tested.

So how to calibrate the torque sensor?

Let’s take a look together!

Torque sensor calibration method and steps:

  1. Calibration preparation: Prepare the calibration tools (weight components, torsion joints (for folding testing machines), enamel discs (for automatic torque machines), rotary testers, torsion handles).
  2. Turn on the industrial control host and open the test software. Make sure that the connection between the pressure sensor and the motion card is stable. The numerical value is within the range of error (0.01gf.cm-0.03gf).
  3. Assemble the auxiliary connectors.
  4. Open the software to select the corresponding range of the sensor. Then open the calibration sensor interface. Clear the value when the sensor has no load.
  5. Select a suitable weight according to the sensor range. Select a small weight for a sensor with a small range, and a larger weight for a large range. For example, choose 200g, 100g weight for 2N.m, choose 500g, 1kg weight for 50N.m. Tie the weight to one end of the connecting piece. Hang it on one end of the pulley through the rope along the groove of the standard piece. Keep the contact state without external force Stablize.
  6. On the software calibration interface, click Allow Calibration. Enter the torque value of the calibration weight (gravity * force arm), and click OK.
  7. Wind the weight in another direction. Check the reverse force value. If the difference is large (>0.5gf.cm), take the average value of the positive and negative force values.
  8. Record the calibration date. Fill in the tool to the “Equipment Sensor Calibration Record Form.
  9. The calibration cycle is normally 1 year. If it is repaired or adjusted during use, it needs to be re-calibrated.

Torque sensors are precision measuring instruments used to measure various torques, revolutions and mechanical thermal efficiencies.

  1. Determine the distance between the prime mover and the load according to the connection form of the shaft and the length of the Dynamic Micro Torque Sensor. Adjust the distance between the prime mover and the load shaft so that the coaxiality of the shaft is less than φ0.03mm. Secure the prime mover and load to the reference plane.
  2. Put the couplings on their respective shafts.
  3. Adjust the distance between the torque sensor and the reference surface. The coaxiality of its axis with the prime mover and the load shaft is less than φ0.03mm. And fix the Dynamic Micro Torque Sensor on the reference surface.
  4. Tighten the coupling and the installation is complete.

If you cannot find an answer to your question in our FAQ, you can always contact us
and we will be with you shortly.

Contact Support

More Featured Torque Sensors

1050A Series Dynamic Torque Transducer

Sino-Inst is a manufacturer of Dynamic Micro Torque Sensors. We offer more than 10 types of Dynamic Torque Transducers. Dynamic Torque Transducers can measure a variety of different mechanical power, rotational speed and torque measuring devices.

Dynamic Micro Torque Sensors are widely used in the following areas:
Application in process industry and process industry;
In sewage treatment systems, measure the relevant power and torque;
Measure the power and torque of machinery such as aircraft, ships, railway locomotives and mines;
Can be used to make viscometers;
Measuring the output power and torque of related devices such as internal combustion engines and rotational forces;
Measure power and torque of torque wrenches, water pumps, etc.

Dynamic Micro Torque Sensor is also called rotary torque transducer, torque transducer. Mainly used for torque measurement in dynamic situations. The dynamic torque sensor is equipped with a speed measuring device, which can measure the rotational speed while measuring the torque. At this time, the torque sensor can also be called a torque speed sensor.

Sino-Inst’s Dynamic Micro Torque Sensor, made in China, have good quality, with better prices. Our Dynamic Micro Torque Sensors are widely used in China, India, Pakistan, USA and other countries.

Sino-Inst’s entire team is well trained, so we can ensure that each customer’s needs are met. If you need any help with your product requirements, whether it is a Dynamic Micro Torque Sensor, level sensors, or other equipment, please give us a call .

Request a Quote

Please enable JavaScript in your browser to submit the form

1050A Series Dynamic Torque Transducer

Posted on by

Dynamic Torque Transducer is an integrated product composed of a resistance strain as a sensitive element and an integrated circuit. It is small in size and is all miniature or small. It is easy to use and install, and the speed can reach 1800 rpm. 1050A Series Dynamic Torque Transducer/Sensor-1000Nm can be used for torque monitoring of sewage treatment system, etc.

RFQ Torque Sensors

Features of 1050A Series Dynamic Torque Transducer

  • The resistance strain is an integrated product composed of sensitive components and integrated circuits, with high precision and stable and reliable performance.
  • No wear parts such as collector rings;
  • Can run at high speed for a long time;
  • Output forward and reverse torque signal;
  • Both ends are keyed connections;
  • The speed can reach 1800 rpm.

Technical Parameters

ParametersTechnical index
Range0-10,20,30,50,100,200,500,1000Nm
Sensitivity1.5±10% mV / V
Zero output±2% F.S.
Nonlinear±0.1，0.3% F.S.
Hysteresis≤±0.05% F.S.
Repeatability≤±0.05% F.S
Creep≤±0.03% F.S/30min
Temperature Sensitivity Drift0.03% F.S. / 10℃
Zero temperature drift0.03% F.S. / 10℃
Input resistance750±10Ω
Input resistance700±5Ω
Insulation resistance≥5000MΩ/ 100VDC
Excitation voltage10-15VDC
Temperature Compensation Range-10 ~ 60ºC
Operating temperature range-20 ~ 80ºC
Safe overload150% F.S.
limit overload200% F.S.
Cable sizeØ5.2×3m
Electrical connectionsRed/E+, Black/E-, Green/S+, White/S-
MaterialStainless or Alloy Steel

Dimensions

ModelRange(Nm)AΦLBCDEFKNMH
1050A1001081844385830221963-M36
1050B50014328565373.540302762-M38
1050F100022169790125605545334-M416

Torque is usually referred to as external torque. For example, the rotation of the main shaft of the lathe is an adverse effect of the benefit of the external torque supplied by the power unit.
Whereas torque is internal torque. When the spindle bearing is working, the secondary benefit of the cutting speed of the CNC blade to the spindle of the machine tool causes it to cause rotational elastic deformation. It can be used to estimate the torque size.

Torque is the torque that produces a flipping effect or rotational deformation of an object, which is equivalent to the multiplication of the force and the moment arm.

Torque is a parameter that is very frequently involved in rotating dynamic systems. In order to detect the rotational torque, the rotation angle phase angle sensor is used more.

The relatively perfect detection technology of torque test is strain force measurement technology. It has the advantages of high precision, fast frequency response, good stability and long service life.

The special torsion resistance strain gauge is hung on the elastic shaft to be measured with strain force viscose, and a strain force bridge is formed. If the power supply is switched on and off during the supply work to the strain force bridge, the light bulb number that the elastic shaft is twisted can be detected. This is the most basic torque sensor approach.

  1. Dynamic torque transducer: mainly used to measure torque and speed in rotating occasions.
    Dynamic torque transducers can be divided into large-range torque sensors, micro-range torque sensors, and disc torque sensors according to their shape and range.
  2. Static torque sensor: mainly used to measure torque in non-rotating situations.

How To Choose A Torque Transducer For Your Application?

Frequently
Asked
Questions

Help Center

The measurement principle of the torque transducer: using the strain gauge electrical measurement technology, a strain bridge is formed on the elastic shaft, and the electrical signal of the elastic shaft being twisted can be measured by supplying power to the strain bridge. After the strain signal is amplified, it is converted into a frequency signal proportional to the torsional strain after pressure/frequency conversion.

Commonly used dynamic torque sensors mainly have the following forms:

  1. Inductive torque sensor: This type of sensor mainly adopts a non-contact measurement method. This kind of torque sensor has a long life, high reliability, and is not easy to be worn.
  2. Potentiometer type torque sensor: This type of sensor can be divided into gear type, torsion bar type, and arm type according to the type. Among them, the torsion bar measurement has a simple structure and relatively high reliability. It was widely used in the early days. Sensors of this type are contacting and suffer from wear that reduces their performance.
  3. Metal resistance strain gauge type: This type of torque sensor is mainly composed of a measuring bridge by pasting strain gauges on the elastic shaft. When the elastic shaft is subjected to torque, it will produce a small deformation and cause the bridge resistance to change. .And the change in the resistance of the strain bridge is converted into a change in the voltage signal to achieve the torque measurement we want.

Torque can be divided into dynamic torque and static torque, which have a great impact on the final assembly of the product. Therefore, in the actual processing process, it is very important to distinguish between the two. Today we are going to tell you the difference between dynamic torque and static torque.

Dynamic torque: It is the peak value displayed in real time during the assembly process when the fastener is tightened. That is, the dynamic torque that the power tool applies to the bolt, overcoming the friction. The axial preload force for the bolts generated by the dynamic torque meets the engineering requirements for the preload force. Generally, the torque value preset by the tool or equipment is the dynamic torque value.

Static torque: refers to the torque required to overcome static friction after a fastener has been fastened and we continue to rotate in the direction of tightening. Generally, the peak torque we measure with an analog hand wrench is the static torque.

Torque sensors are the detection of torsional torque sensing on various rotating or non-rotating mechanical components. Torque sensors convert physical changes in torque into precise electrical signals. Torque sensors can be used in the manufacture of torque wrenches.

Sino-Inst is a manufacturer of Dynamic Torque Transducers. We offer more than 10 types of Dynamic Torque Transducers. Dynamic Torque Transducers can measure a variety of different mechanical power, rotational speed and torque measuring devices.

Dynamic Torque Transducers are widely used in the following areas:
Application in process industry and process industry;
In sewage treatment systems, measure the relevant power and torque;
Measure the power and torque of machinery such as aircraft, ships, railway locomotives and mines;
Can be used to make viscometers;
Measuring the output power and torque of related devices such as internal combustion engines and rotational forces;
Measure power and torque of torque wrenches, water pumps, etc.

Dynamic Torque Transducers is also called rotary torque transducer, torque transducer. Mainly used for torque measurement in dynamic situations. The dynamic torque sensor is equipped with a speed measuring device, which can measure the rotational speed while measuring the torque. At this time, the torque sensor can also be called a torque speed sensor.

Sino-Inst’s Dynamic Torque Transducers, made in China, have good quality, with better prices. Our Dynamic Torque Transducers are widely used in China, India, Pakistan, USA and other countries.

Sino-Inst’s entire team is well trained, so we can ensure that each customer’s needs are met. If you need any help with your product requirements, whether it is a Dynamic Torque Transducers, level sensors, or other equipment, please give us a call .

Request a Quote

Please enable JavaScript in your browser to submit the form

Torque Sensors

Posted on by

Torque sensors are used to detect torsional torque sensing on various rotating or non-rotating mechanical components. And Torque sensors convert physical changes in torque into precise electrical signals.

This technology is used in a variety of industries for many different applications, making it a versatile tool. Some of these industries include manufacturing, automotive, and aerospace.

Sino-Inst’s torque sensors are known for their high precision and fast frequency response. They also have good reliability and long life, making them a wise investment for your business.

RFQ

Featured Torque Sensors for Sale

Dynamic Torque Sensor

1050A Series Dynamic Torque Transducer
1050C Dynamic Micro Torque Sensor-10 Nm
1050D Dynamic Torque Sensor for Dynamic Micro Torque Measurement-5Nm
1050E Dynamic Micro Torque Sensor 0-0.1-5N.m
1010 Dynamic Rotary Torque Sensor 0-5-1000N.m
1055 Dynamic Torque Sensor 0-3-100N.m
1060 Rotary Torque Transducer-5000Nm Torque and Rotation Measurement
5069 Non Contact Torque Sensor–5000Nm-OLED
803 Non Contact Rotary Torque Sensor-100KN.m-Non-Contact
901 Inline Contactless Torque Sensor – 5 N·m-300000 N·m
818 Shaft Torque Sensor-Dynamic Dual Range
SI-T40B Digital Torque Transducer-Non-Contact-No Bearings

Static Torque Sensor

11A Static Torque Sensor Flange-to-Shaft Mount
98 Flange-to-Flange Reaction Static Torque Sensor
17 Reaction Torque Sensor – Keyed Shaft
22 Static Torque Transducer with Internal Square-Flange Connection
12 Reaction Torque Sensor for Micro Range
120 Reaction Torque Sensor for Torque Wrench-Motor-Engine
2150 Dual Range Static Torque Sensor | Flange to Flange
56 Micro Reaction Torque Sensor | For Small Range, Tight Spaces
8050 Thin Hollow Type Reaction Torque Transducer Flange-to-Flange Mount
32 Static Torque Sensor with External Square Key-Flange Connection

What Is a Torque Sensor?

Torque is the force that makes an object turn. The torque of the engine refers to the torque output by the engine from the crankshaft end. It is inversely proportional to the engine speed under the condition of fixed power. The faster the speed, the less torque, and vice versa. It reflects the load capacity of the car within a certain range.

A torque sensor is a device used to measure torque and torque.

The torque sensor is a product composed of a sensitive element and an integrated circuit chip according to the strain of the varistor. The torque sensor processes, shapes and amplifies the torque signal by means of measurement. And transmit the output electrical signal. This is a torque sensor or torque transmitter.

Read more about: Types Of Torque Transducers

Torque sensor working principle

Torque is usually referred to as external torque. For example, the rotation of the main shaft of the lathe is an adverse effect of the benefit of the external torque supplied by the power unit.

Whereas torque is internal torque. When the spindle bearing is working, the secondary benefit of the cutting speed of the CNC blade to the spindle of the machine tool causes it to cause rotational elastic deformation. It can be used to estimate the torque size. Torque is the torque that produces a flipping effect or rotational deformation of an object. Equivalent to the multiplication of the force and the force arm.

Torque is a parameter that is very frequently involved in rotating dynamic systems.

The relatively perfect detection technology of torque test is strain force measurement technology. It has the advantages of high precision, fast frequency response, good stability and long service life.

The special torsional strain gauge is pasted on the elastic shaft to be measured with strain glue to form a strain bridge. The electrical signal of the elastic shaft being twisted can be measured by supplying power to the strain bridge.

After the strain signal is amplified, it is converted into a frequency signal proportional to the torsional strain after pressure/frequency conversion.

The energy input and signal output of this system are undertaken by two sets of special toroidal transformers with gaps. Therefore, the contactless energy and signal transmission functions are realized.

Torque sensor Types

  1. Dynamic torque sensor: mainly used to measure torque and speed in rotating occasions.
    Dynamic torque sensors can be divided into large-range torque sensors, micro-range torque sensors, and disc torque sensors according to their shape and range.
  2. Static torque sensor: mainly used to measure torque in non-rotating situations.

Torque Sensor Applications

A torque sensor is a precision measuring instrument that measures various torques, rotational speeds and mechanical power. Wide range of applications. Mainly used for:

  1. Detection of output torque and power of rotating power equipment such as electric motors, engines, and internal combustion engines;
  2. Detection of torque and power of fans, water pumps, gearboxes, and torque wrenches;
  3. Detection of torque and power in railway locomotives, automobiles, tractors, airplanes, ships, and mining machinery;
  4. It can be used for the detection of torque and power in the sewage treatment system;
  5. Can be used to manufacture viscometers;
  6. Can be used in process industry and process industry;
  7. Can be used in laboratories, testing departments, as well as production monitoring and quality control;

More Torque Measurement Solutions

High Pressure Rotameter for Liquids/gas-Upto 25 Mpa

High pressure rotameter is suitable for flow measurement of high pressure liquid and gas.Standard type rotameter: DN15-DN50, can withstand 4.0MPa. High pressure rotameter: DN15-DN50, can withstand 25MPa. The pressure level…

What Is a Torque Transducer? How to Choose?

Torque transducers are essential tools in many industries that rely on precise measurements of rotational forces. These devices play a crucial role in measuring the torque produced by engines, motors,…

Stationary Torque Transducers

Stationary Torque Transducers are also called Static Torque Transducers, or Stationary Transducers. Static torque transducers are compact, robust and maintenance-free, offering many advantages. Sino-Inst’s Stationary Torque Transducers are based on…

Sino-Inst is a manufacturer of Torque Sensors for Torque Torque Detection. We offer more than 20 types of Torque Sensors, 60% are dynamic torque sensors, 40% are static torque sensors.

Torque sensor is also called rotary torque transducer, torque transducer. Mainly used for torque measurement in dynamic or static situations. The dynamic torque sensor is equipped with a speed measuring device, which can measure the rotational speed while measuring the torque. At this time, the torque sensor can also be called a torque speed sensor.

The application range of dynamic torque sensors is very common, and can be used to measure torque in tractors, automobiles, airplanes, various ships, and mining machinery. It can be used for torque measurement and power measurement in sewage treatment systems. It is also widely used in industrial and process industries. It is also used to detect the output torque and power of various rotating force equipment.

For example: electric motor, engine, internal combustion engine, etc. Can be used to make viscometers.

The application range of static torque sensor is mainly used in test systems such as experimental machines and static torque detection.

Sino-Inst’s Torque Sensors, made in China, have good quality, with better prices. Our Torque Sensors are widely used in China, India, Pakistan, USA and other countries.

Sino-Inst’s entire team is well trained, so we can ensure that each customer’s needs are met. If you need any help with your product requirements, whether it is a Torque Sensors, level sensors, or other equipment, please give us a call.

Request a Quote

Please enable JavaScript in your browser to submit the form